Clean & Safe! Food-compliant plastics from igus®

igus® products made of food-compliant plastics help you to comply with the strict requirements for food hygiene and food safety in all process stages in food production.

We have developed physiologically safe, FDA-approved, 10/2011 EC-compliant high-performance plastics for the food industry.

If you would like to learn more about our motion plastics then you can get some more information from our food industry site

image11 image11_1

The brexit referendum

Editor Matthew Aldridge writes:

Dear Sir or Madam,
If you decide to vote today, no matter how you vote in the brexit referendum, can I please urge you to continue to vote for motion plastics®:

– Vote LEAVE lubrication, use igus® motion plastics® to make your machine truly maintenance free
– Vote REMAIN with cost savings, use igus® motion plastics® to save time and money

Well, the summer is almost upon us once more, and so the editor of this newsletter will be taking a well earned rest, and will resume services in September. However, igus® continues at your service, 8-8 Monday to Friday, 8-12 on Saturday, and my promise still holds true: if you have moving parts on your machine, it is highly likely we can save you money while also increasing the life of your design!

Simply email me at with the details of your requirements and, I promise I will give it my urgent attention. This applies to bearings, linear guides, cable chains and flexible cables, the samples are free and you could save a lot of money, please vote for motion plastics®!
Best regards,

The brexit referendum

Thank you

Video of the Week – CFRIP® tool

igus® Video of the Week – online 3D printing service with instant quotations

Stripping the insulation jacket from high quality cables is a very time consuming operation.  If performed manually with a sharp cutting tool the insulation of the inner core cables can be damaged, and may result in a safety hazard or expensive scrapping of material.  The risk is compounded when long lengths of cable jackets have to be stripped.

igus® has introduced the CFRIP® tear strip, along with a special plastic hand tool, that reduces cable insulation stripping times by up to 50% – saving both time and money.  Requiring no cutting operation with metal tools, the outer jacket (inner jacket on shielded types) can be quickly and safely removed to the desired length.

This feature is now available on 569 e-chain® cables, including the new CF78.UL PUR control cable, providing quick and easy cable striping without damaging the core insulation or outer jacket.  The CFRIP® technology received the IF Design Award in 2016.

iglidur® I3-PL – wear-resistant tribo-powder for 3D SLS printing

parts are three times more wear-resistant than those printed from standard materials

igus® has expanded its 3D printing material offering further with the introduction of a material suitable for Selective Laser Sintering (SLS). With the familiar wear resistance of the four already available tribo-filaments for Fused Deposition Modelling (FDM), the new iglidur® I3-PL tribo-powder is for printing special 3D parts using the SLS technique.

In the igus® test laboratory, plain bearings made from the new material have been compared with those printed from conventional SLS materials. After pivoting, rotating and linear testing, initial results indicate that the iglidur® I3-PL parts are at least three times more wear resistant.

“Selective laser sintering produces a 3D part with better precision, compared to parts printed using the FDM technique,” explains Robert Dumayne, director at igus®. “Another advantage of the new iglidur® I3-PL material is that the parts can achieve a much higher strength due to the pressure in the SLS method.”

An additional benefit of using the laser sintering is that no support structures are needed. This is because the loose powder, which is not melted by the laser, acts as the supporting material. Thus less finishing work is required on the components and the parts can be used directly.

iglidur® I3-PL – wear-resistant tribo-powder for 3D SLS printing

Video of the Week – clever plastics for any bearing application with iglidur®

igus® Video of the Week – online 3D printing service with instant quotationsThis week’s video of the week explores the versatility of iglidur® plastic plain bearings from industrial tribo-polymer specialist, igus® – delivering high performance across the widest range of applications and industries.

iglidur® polymer plain bearings offer versatile, low cost, lubrication and maintenance-free operation across the broadest range of industries and applications, including automotive, aerospace, food and packaging, agriculture and construction. iglidur® plastic bearings are clean and dry-running, eliminating dirt and debris build-up, as well as lightweight and low-wear – with all iglidur® materials extensively tested in the igus® test lab in Cologne, the industry’s largest facility for testing plastic plain bearings.

This is why igus® can always offer a solution, even for demanding applications with high loads or those requiring resistance to extreme temperatures, UV rays or chemicals. Furthermore, using iglidur® plain bearings in your application can reduce costs and at the same time increase service life.

Page 9 of 32« First...7891011...2030...Last »