Issue 01/2020

Happy new year and new decade to all newsletter readers!

Perhaps like me you made a list of new years resolutions, which is already looking a little too long. When I was at school, a wise person gave me some sound advice on writing lists; put down everything you know then “etc.” at the end, the reader will then assume you know more than you do. I still use this trick to this day! Anyway, no matter what other resolutions you may have, resolve one more thing for 2020; improve the life of your machine while saving money! Throughout 2020 my offer still stands, so email me with the details of your requirements and, I promise I will give it my urgent attention. This applies to bearings, linear guides, cable chains and flexible cables, the samples are free and you could save a lot of money. You are also always welcome to visit us in Northampton!

Read More

Issue 10/2019

Autumn is here and the UK engineering exhibition season starts with Advanced Engineering, again at the NEC, on 30th and 31st October 2019. You will find igus® on stand H8, where we plan to have all 2019 new products on show and VR headsets where you can fly through the igus® factory. As always, we will have engineers on hand to talk you through the products, and we will be serving drinks and light refreshments all day.

Read More



Save today for a better tomorrow

We at igus® have no minimum order quantity, so you can use this same rack system for small customers, and we can certainly supply either components or subassemblies, so there is no need to try and build a linear system yourself – you buy the whole thing complete from igus®.

Read More

iglidur®

Made from high performance polymers, iglidur® plain bearings are wear-resistant tribo-polymers improved by precise additions of strengthening materials and solid lubricants. Tested thousands of times, igus® engineers developed and tested 267 new plastic compounds each year. The finely tuned combination of plastic matrix, strengthening components and solid lubricants in every single tribo-polymer results in an individual properties profile in each case. 

igus® have multiple price breaks from 1 piece to 5000 pieces.

Yes, we can machine, mould, 3D printing or laser cut, depending on the part. Please contact our dry-tech® team for all enquiries at sales@igus.co.uk 

Yes we can, but it is weight dependent. Contact igus® to inquire on pricing: 01604 677240

igus® have a range of under water materials however, it will depend on your application which material you may need. Try our online configurator.

iglidur®X bearings are usually the best for mountain bike application however depending on which part of the bike will depend on the material. Click here for some suggestions. 

Alternatively, call or email the office for some technical help at sales@igus.co.uk or 01604 677240

Material requirements depend on the application. igus® have multiple FDA materials that will suit your needs. We have FDA iglidur® bearings, e-chain® and stock materials. 

Yes, we can machine parts to your drawing, send us the enquiry via this form and you will get a quote by return, usually the same day, certainly within 24 hours. 

The iglidur® plain bearings are designed to be pressed into a housing (with an H7 tolerance) The bearing will have a nominal size for the outer diameter. They are then secured by the press-fit. Please be aware that the outside diameter of the bearing is, depending on the nominal size, about 0.1 to 0.25 mm larger than the housing in the non-pressed state. The inner diameter will reach its final dimensions and tolerances when pressed in.

All of the igus® materials are RoHS compliant.  The RoHS abbreviation means “Restriction of (the use of certain) Hazardous Substances” You can find all details here.

Please send all orders to orders@igus.co.uk

All standard products are available on -line so please order on line at www.igus.co.uk

iglidur® J3 is an extremely low wear material.  It gives up to three times more wear resistance than standard iglidur® J , however is yellow and sometimes customers need to have a material which is invisible within their application or certainly hidden.  iglidur® J3, which is now available in black means that customers can have a material that is extremely wear resistant and allows for the bearing to be hidden.

All of our bearings run dry as you know, but sometimes extreme applications require an extra seal. Rubber seals in abrasive environments do not work very well, they wear out very quickly, however felt seals act as a filter and a seal when running dry, keeping out those abrasive particles. This allows for the bearings to last much longer in these really extreme environments, agriculture being one of them.

As you know, our iglidur® bearings are injection moulded.  The materials are homogeneous and this means that you get the same performance throughout the wall thickness. However, even with this predictable nature customers are demanding more high tech solutions to their reduction in downtime.  So, we have designed and are now producing iglidur® bearings with a wear detecting system inside the material. This allows the bearing to have a set amount of wear and when the bearing reaches this, it sends a signal to a module which alerts the customer that the bearing is due to be inspected. The signal is not sent at a failing point but it will need to be looked at soon. 

Yes we do! We have a large range but the most popular ones are iglidur® ,X A350 and A500. These will be equivalent to the likes of PEEK & HPV

Nylon is its own material as is iglidur®. They are not the same but have similar properties in some of the iglidur® materials. igus® have comparable materials that can be offered as an equivalent to Nylon or any other traditionally known plastics. 

Currently not in the plain bearing range but we do offer them in the igubal range

We have regular shipments in from Germany but to keep costs down as low as we can for customers we have a collective shipment from the head office which has multiple orders on. This shipment comes by sea and we quote 10 days as a worst case scenario. There are options for faster shipments should you require this but there will be a surcharged cost. 

Occasionally, as the stock is live there can be instances where the website is slightly out. If this is the case we will do our best to offer an alternative or see if we can get the parts quicker from Germany.

This is an age old quandary and to be honest it can be confusing. The USA do things slightly differently to the rest of the world and sometimes change the part numbers to suit their market.

  • Load per bearing point between 100 and 1,000N
  • Surface speed between 100 and 1,300rpm
  • Available shaft diameters:
    6, 8, 10, 12, 13, 14, 15, 16, 17, 18, 20mm
  •  Tests at room temperature and up to 150°C
  • Underwater tests

We test them against the likes of POM-C, PEEK, PTFE , Nylon and many more.

Read More

the-chain®

e-chains®, or energy-chains, protect and guide moving cables and hoses. They go by a lot of names: cable carrier, cat track, drag chain and power-chain. They are usually made of plastic and occasional out of metal, though this has some drawbacks.

igus® readychain® systems are e-chain® systems supplied complete with cables, hoses, connectors and even custom metal work.  This allows them to be fitted quickly and easily to your machine, saving time and money.

igus® readychains can be supplied at 4 levels:

  • readychain® basic: energy chains supplied with cables and hoses installed and cut to length
  • readychain® standard: energy chains supplied with cables and hoses installed, cut to length complete with required connectors fitted and electrically tested
  • readychain® standard plus: energy chains supplied with cables and hoses installed, cut to length complete with required connectors fitted and electrically tested with optimised connection points / interfaces
  • readychain® premium: one or several energy chains supplied with cables and hoses installed, cut to length complete with required connectors fitted and  electrically tested, supplied on a transport rack for easy transport and installation

There is certain basic data that is required – the diameters, weights and minimum bend radius data for the cables and hoses. Also, the application data, such as machine travel length, speed, acceleration and even the environmental conditions. Service life calculations can be obtained with our online tool here.

At igus®, we have online expert systems to help which offer the available options for these inputs and show respective lifetimes and costs.  Of course, we can also support by phone, email, Livechat and visits to your site by our sales engineer team.

The longest in service now is a travel length of 615m, which has been running trouble-free for 10 years. We are confident we have the products that will reach 800m travels and beyond.

Use the e-chain® calculation tool here.

igus® also offers a full range of dynamically rated cables for use in constantly flexing applications (“chainflex®“), which are guaranteed for 10 million movements or 36 months when used as per our guidelines. These can be supplied with or without connectors and pre-fitted into the energy chains. We also offer steel and aluminium guide troughs for longer travels, cable clamping solutions for cable strain-relief and chain interior separation options to ensure a long cable life inside the chain.  We also offer design and project support, onsite services such as supervision and inspection and full turnkey installation.

igus® e-chains®, or energy chains, can cope with fill weights of up to 600 kg/m unsupported.

igus® can carry out offshore surveys on existing chains, and also offer full turnkey installation, or installation supervision, on any of our chains being installed offshore.

igus® e-loop has been designed to enable the operator to replace single cables/hoses in situ, rather than having to replace the full service loops. The e-loop is built up in links, which can be opened to allow the cables to be changed. The dyneema rope which runs through the middle of the e-loop is pre-tensioned to the working load, and so takes the strain of the cables or hoses in use.

Yes! igus® e-loop is supplied with an industry-standard mounting bracket and flange, as per on major OEM top drives, so it is a simple and quick retrofit!

igus® has thousands of energy chains on existing applications offshore including cantilever skids, pipelay towers, gantry cranes, and many more as seen here. Our polymer energy chains are maintenance-free, corrosion resistant, and cost effective vs equivalent steel chains.

Yes!

igus® can carry out offshore surveys on existing chains/cable management solutions and retrofit them with a new maintenance free igus® energy chain! We offer a complete turnkey engineered solution to suit our customers’ requirements!

Yes, igus® has cables for many industries, including offshore. Our cables with DNV/GL & NEK606 certification can be found and investigated here.

Although igus® does not manufacture hydraulic hoses, the hoses can be sourced and installed within your e-chain® to your requirements.

Our online tool prevents our customers from over filling the e-chains®. We have recommendations for the amount of clearance each service should have when installed within the e-chain® (relative to its OD); 10% for all round and flat cables, 5-10% for pneumatics, 20% for hydraulic hoses and 15-20% for all other media hoses.

  1. ready to install: all readychain® systems are assembled at one of the worldwide igus® factories
  2. lifetime guarantee: all readychain® components undergo extensive checks through quality and functional tests
  3. reduce the number of your suppliers by 75%: lower project planning expenditure and increase efficiency
  4. flexible production plans: state of the art technology to ensure optimised production
  5. safeguarded and short delivery times: our experienced and consistent team guarantees customer satisfaction for high quality at low costs

The limiting factor would be how large the drum is with this chain wrapped around, and the lifting gear required to handle on site, but we are regularly delivering systems for travels of 100m and beyond; these can be split mid length too for a smaller diameter drum.

Almost every industry with moving energy needs use e-chains®: cranes, lifts, theatres, vessels, machine tools, renewable energy systems, electronics, pick-and-place machines, telescopes, agriculture, printing, vehicle sliding doors, and so on – the list is endless.

The maximum is currently 80M. 

4M/S

Absolutely!

10 million cycles, or 10,000km is our guaranteed statement

 

No, a visual inspection is required every 6-12 months and adjustment of cable tensions (if necessary)

88% faster installation time than standard chain

All igus® energy chain sensors (push/pull monitoring, abrasion, motion, wear measurement, break detection) can be connected to an icom or icom. plus module. The module can transmit the measurement data to an equipment monitor or a computer, where they are displayed individually or in a dashboard.

No, you do not need that. In monitoring their own production, every entrepreneur can decide for himself how much he wants to digitise and utilise the opportunities offered by the Internet of Things. Not everyone is already connected and not everyone wants to network.

Many are concerned about transferring their sensitive company data to external servers, even if high security standards are guaranteed. However, if you use the isense online system from igus, to synchronise and keep data up-to-date, the installed module connects directly to the igus server and sends the data anonymously. The company’s own network remains unaffected at all times.

Companies who still prefer to run their production monitoring offline, i.e. without Internet connection and permanent data update in their own operating system, can certainly do so. They install systems that give a warning in case of defects or simply switch off the machines via normally closed or normally open contacts to prevent major damage and breakdowns.

Such sensors for energy chainscables and bearing technology, such as the sensor for break detection on e-chains EC.B, run autonomously and have a great effect with low installation effort.

No, you do not have to. If your organisation wants to monitor production and switch to predictive maintenance, you do not have to buy extra hardware and set up a new IT infrastructure.

The prerequisite for the most accurate information possible on the trouble-free running time of our components is that the details of use given by the operator are accurate. This includes information on the place of use with weather conditions and temperatures, distances, loads, number of cycles, etc.

When computers and machines learn from collected data and derive an action from it, one speaks of Artificial Intelligence (AI). The term machine learning is also used in the machine sector.

In private life, one example is that of users of music streaming services. Here an algorithm constantly learns from the behaviour of the user

With CF.Q, CF.D and CF.P, igus has three sensors in the product range that are designed for chainflex cables.

CF.Q is the sensor for the electrical specifications of chainflex cables

  • Belongs to prevention of crash and can be used without an additional module
  • Indicates changes in the electrical properties
  • In the event of a fault, information by means of NO contact or message

We have a configurator tool and a product finder tool which both will help you specify the energy chain required. Click here for the product finder.

Click here for the configurator tool

The automotive guarantee is a service that igus® offers to ensure that the systems are installed correctly, therefore enabling the 36 month guarantee to be awarded for both chain and cable. 

There are 3 options which you can find information about here: https://www.igus.co.uk/info/automotive-guarantee

 

Read More

Issue 11/2019 (2)

Now is perhaps the right time to introduce technological innovations and, simultaneously, save cash: the most cost-effective cable that is guaranteed to work.

igus® supplies cables to match any electrical specifications, with up to 7 different cable qualities, based on thousands of practical tests. Ask for a quotation within 24 hrs.

What always applies? The chainflex® guarantee of 36 months*.

We look forward to welcoming you to our SPS trade show stand.

Read More

Issue 11/2019

One of the most frightening features on my smartphone is that in the morning it often prompts me to “rediscover this day”, then opens up an album showing photos taken one, two, five years ago. I often click on this when having my breakfast, and am often startled at how quickly time has flown by. A photo from three years ago seems to be only a month or two back in my mind. How time flies! As the years roll by, one constant remains, and that is my promise to you, igus® products provide a technical benefit while saving you money. If you make machines and would like to test this, email me with the details of your requirements and, I promise I will give it my urgent attention. This applies to bearings, linear guides, cable chains and flexible cables, the samples are free and you could save a lot of money.

Read More

Issue 05/2019

I recently heard a story of a businessman who went into one of the specialist banks in central London and asked for a £5000 loan, needed for a European business trip over the next two weeks. The bank knew the man but asked for some kind of security, so he handed them the keys to his new Rolls Royce. One of the employees then drove the car into the bank’s underground garage, parked it, and they all had a good laugh about a man using a £250,000 car as collateral against a £5000 loan.

Read More